The content below comes mostly from Practical Networking's [Networking Fundamentals series](https://www.youtube.com/playlist?list=PLIFyRwBY_4bRLmKfP1KnZA6rZbRHtxmXi). If you prefer this content in video form, check out these two videos:
* [The OSI Model: A Practical Perspective - Layers 1 / 2 / 3](https://www.youtube.com/watch?v=LkolbURrtTs&list=PLIFyRwBY_4bRLmKfP1KnZA6rZbRHtxmXi&index=3)
* [The OSI Model: A Practical Perspective - Layers 4 / 5+](https://www.youtube.com/watch?v=0aGqGKrRE0g&list=PLIFyRwBY_4bRLmKfP1KnZA6rZbRHtxmXi&index=4)
The overall purpose of networking as an industry is to allow two hosts to share data. Before networking if I want to get data from this host to this host I'd have to plug something into this host walk it over to the other host and plug it into the other host.
Networking allows us to automate this by allowing the host to share data automatically across the wire for these hosts to do this they must follow a set of rules.
This is no different than any language. English has a set of rules that two English speakers must follow. Spanish has its own set of rules. French has its own set of rules, while networking also has its own set of rules
The OSI Model (Open Systems Interconnection Model) is a framework used to describe the functions of a networking system. The OSI model characterises computing functions into a universal set of rules and requirements to support interoperability between different products and software. In the OSI reference model, the communications between a computing system are split into seven different abstraction layers: **Physical, Data Link, Network, Transport, Session, Presentation, and Application**.
Layer 1 in the OSI model and this is known as physical, the premise of being able to get data from one host to another through a means be it physical cable or we could also consider Wi-Fi in this layer as well. We might also see some more legacy hardware seen here around hubs and repeaters to transport the data from one host to another.
Layer 2, the data link enables a node to node transfer where data is packaged into frames. There is also a level of error correcting that might have occurred at the physical layer. This is also where we introduce or first see MAC addresses.
You have likely heard the term layer 3 switches or layer 2 switches. In our OSI model Layer 3, the Network has a goal of an end to end delivery, this is where we see our IP addresses also mentioned in the first-day overview.
Routers and hosts exist at layer 3, remember the router is the ability to route between multiple networks. Anything with an IP could be considered Layer 3.
If we think about getting data from one host to another, each host has an IP address but there are several switches and routers in between. Each of the devices has that layer 2 MAC address.
The layer 2 MAC address will go from host to switch/router only, it is focused on hops whereas the layer 3 IP addresses will stay with that packet of data until it reaches its end host. (End to End)
Now there is a network protocol that we will get into but not today called ARP(Address Resolution Protocol) which links our Layer3 and Layer2 addresses.
Service to Service delivery, Layer 4 is there to distinguish data streams. In the same way that Layer 3 and Layer 2 both had their addressing schemes, in Layer 4 we have ports.
Let's now try and explain what's happening when hosts are communicating with each other using this networking stack. This host has an application that's going to generate data that is meant to be sent to another host.
Layer 4 is going to add a header to that data which can facilitate the goal of layer 4 which is service to service delivery. This is going to be a port using either TCP or UDP. It is also going to include the source port and destination port.
This segment is going to be passed down the OSI stack to layer 3, the network layer, and the network layer is going to add another header to this data.
This header is going to facilitate the goal of layer 3 which is the end to end delivery meaning in this header you will have a source IP address and a destination IP, the header plus data may also be referred to as a packet.
Layer 3 will then take that packet and hand it off to layer 2, layer 2 will once again add another header to that data to accomplish layer 2's goal of hop to hop delivery meaning this header will include a source and destination mac address.
The Application sending the data is being sent somewhere so the receiving is somewhat in reverse to get that back up the stack and into the receiving host.
