mirror of
https://github.com/daeuniverse/dae.git
synced 2025-07-30 22:59:00 +07:00
chore: bpf headers to submodule
This commit is contained in:
mzz2017
@ -6,5 +6,4 @@
|
||||
package control
|
||||
|
||||
// $BPF_CLANG and $BPF_CFLAGS are set by the Makefile.
|
||||
//go:generate sh -c "bpftool btf dump file /sys/kernel/btf/vmlinux format c > kern/headers/vmlinux.h"
|
||||
//go:generate go run github.com/cilium/ebpf/cmd/bpf2go -cc $BPF_CLANG -strip $BPF_STRIP -cflags $BPF_CFLAGS -target $BPF_TARGET bpf kern/tproxy.c -- -I./headers
|
||||
|
||||
1
component/control/kern/headers
Submodule
1
component/control/kern/headers
Submodule
Submodule component/control/kern/headers added at 372c3cc61d
@ -1,137 +0,0 @@
|
||||
#ifndef __IF_ETHER_DEFS_H__
|
||||
#define __IF_ETHER_DEFS_H__
|
||||
/*
|
||||
* IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble
|
||||
* and FCS/CRC (frame check sequence).
|
||||
*/
|
||||
|
||||
#define ETH_ALEN 6 /* Octets in one ethernet addr */
|
||||
#define ETH_TLEN 2 /* Octets in ethernet type field */
|
||||
#define ETH_HLEN 14 /* Total octets in header. */
|
||||
#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */
|
||||
#define ETH_DATA_LEN 1500 /* Max. octets in payload */
|
||||
#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */
|
||||
#define ETH_FCS_LEN 4 /* Octets in the FCS */
|
||||
|
||||
#define ETH_MIN_MTU 68 /* Min IPv4 MTU per RFC791 */
|
||||
#define ETH_MAX_MTU 0xFFFFU /* 65535, same as IP_MAX_MTU */
|
||||
|
||||
/*
|
||||
* These are the defined Ethernet Protocol ID's.
|
||||
*/
|
||||
|
||||
#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */
|
||||
#define ETH_P_PUP 0x0200 /* Xerox PUP packet */
|
||||
#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */
|
||||
#define ETH_P_TSN 0x22F0 /* TSN (IEEE 1722) packet */
|
||||
#define ETH_P_ERSPAN2 0x22EB /* ERSPAN version 2 (type III) */
|
||||
#define ETH_P_IP 0x0800 /* Internet Protocol packet */
|
||||
#define ETH_P_X25 0x0805 /* CCITT X.25 */
|
||||
#define ETH_P_ARP 0x0806 /* Address Resolution packet */
|
||||
#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */
|
||||
#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */
|
||||
#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
#define ETH_P_DEC 0x6000 /* DEC Assigned proto */
|
||||
#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */
|
||||
#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */
|
||||
#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */
|
||||
#define ETH_P_LAT 0x6004 /* DEC LAT */
|
||||
#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */
|
||||
#define ETH_P_CUST 0x6006 /* DEC Customer use */
|
||||
#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */
|
||||
#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */
|
||||
#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */
|
||||
#define ETH_P_ATALK 0x809B /* Appletalk DDP */
|
||||
#define ETH_P_AARP 0x80F3 /* Appletalk AARP */
|
||||
#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
|
||||
#define ETH_P_ERSPAN 0x88BE /* ERSPAN type II */
|
||||
#define ETH_P_IPX 0x8137 /* IPX over DIX */
|
||||
#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */
|
||||
#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */
|
||||
#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */
|
||||
#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol
|
||||
* defined in draft-wilson-wrec-wccp-v2-00.txt */
|
||||
#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */
|
||||
#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */
|
||||
#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */
|
||||
#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */
|
||||
#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */
|
||||
#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */
|
||||
#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport
|
||||
* over Ethernet
|
||||
*/
|
||||
#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
|
||||
#define ETH_P_PROFINET 0x8892 /* PROFINET */
|
||||
#define ETH_P_REALTEK 0x8899 /* Multiple proprietary protocols */
|
||||
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
|
||||
#define ETH_P_ETHERCAT 0x88A4 /* EtherCAT */
|
||||
#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */
|
||||
#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */
|
||||
#define ETH_P_PREAUTH 0x88C7 /* 802.11 Preauthentication */
|
||||
#define ETH_P_TIPC 0x88CA /* TIPC */
|
||||
#define ETH_P_LLDP 0x88CC /* Link Layer Discovery Protocol */
|
||||
#define ETH_P_MRP 0x88E3 /* Media Redundancy Protocol */
|
||||
#define ETH_P_MACSEC 0x88E5 /* 802.1ae MACsec */
|
||||
#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */
|
||||
#define ETH_P_MVRP 0x88F5 /* 802.1Q MVRP */
|
||||
#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */
|
||||
#define ETH_P_NCSI 0x88F8 /* NCSI protocol */
|
||||
#define ETH_P_PRP 0x88FB /* IEC 62439-3 PRP/HSRv0 */
|
||||
#define ETH_P_CFM 0x8902 /* Connectivity Fault Management */
|
||||
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
|
||||
#define ETH_P_IBOE 0x8915 /* Infiniband over Ethernet */
|
||||
#define ETH_P_TDLS 0x890D /* TDLS */
|
||||
#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
|
||||
#define ETH_P_80221 0x8917 /* IEEE 802.21 Media Independent Handover Protocol */
|
||||
#define ETH_P_HSR 0x892F /* IEC 62439-3 HSRv1 */
|
||||
#define ETH_P_NSH 0x894F /* Network Service Header */
|
||||
#define ETH_P_LOOPBACK 0x9000 /* Ethernet loopback packet, per IEEE 802.3 */
|
||||
#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
#define ETH_P_DSA_8021Q 0xDADB /* Fake VLAN Header for DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */
|
||||
#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
|
||||
|
||||
#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value
|
||||
* then the frame is Ethernet II. Else it is 802.3 */
|
||||
|
||||
/*
|
||||
* Non DIX types. Won't clash for 1500 types.
|
||||
*/
|
||||
|
||||
#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */
|
||||
#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */
|
||||
#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */
|
||||
#define ETH_P_802_2 0x0004 /* 802.2 frames */
|
||||
#define ETH_P_SNAP 0x0005 /* Internal only */
|
||||
#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */
|
||||
#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/
|
||||
#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */
|
||||
#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */
|
||||
#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */
|
||||
#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/
|
||||
#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/
|
||||
#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */
|
||||
#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */
|
||||
#define ETH_P_CONTROL 0x0016 /* Card specific control frames */
|
||||
#define ETH_P_IRDA 0x0017 /* Linux-IrDA */
|
||||
#define ETH_P_ECONET 0x0018 /* Acorn Econet */
|
||||
#define ETH_P_HDLC 0x0019 /* HDLC frames */
|
||||
#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */
|
||||
#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */
|
||||
#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */
|
||||
#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */
|
||||
#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */
|
||||
#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */
|
||||
#define ETH_P_XDSA 0x00F8 /* Multiplexed DSA protocol */
|
||||
#define ETH_P_MAP 0x00F9 /* Qualcomm multiplexing and
|
||||
* aggregation protocol
|
||||
*/
|
||||
#define ETH_P_MCTP 0x00FA /* Management component transport
|
||||
* protocol packets
|
||||
*/
|
||||
|
||||
#endif
|
||||
@ -1,105 +0,0 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
|
||||
#ifndef __PKT_CLS_DEFS_H__
|
||||
#define __PKT_CLS_DEFS_H__
|
||||
|
||||
#define TC_COOKIE_MAX_SIZE 16
|
||||
|
||||
/* Action attributes */
|
||||
|
||||
/* See other TCA_ACT_FLAGS_ * flags in include/net/act_api.h. */
|
||||
#define TCA_ACT_FLAGS_NO_PERCPU_STATS \
|
||||
(1 << 0) /* Don't use percpu allocator for \
|
||||
* actions stats. \
|
||||
*/
|
||||
#define TCA_ACT_FLAGS_SKIP_HW (1 << 1) /* don't offload action to HW */
|
||||
#define TCA_ACT_FLAGS_SKIP_SW (1 << 2) /* don't use action in SW */
|
||||
|
||||
/* tca HW stats type
|
||||
* When user does not pass the attribute, he does not care.
|
||||
* It is the same as if he would pass the attribute with
|
||||
* all supported bits set.
|
||||
* In case no bits are set, user is not interested in getting any HW statistics.
|
||||
*/
|
||||
#define TCA_ACT_HW_STATS_IMMEDIATE \
|
||||
(1 << 0) /* Means that in dump, user \
|
||||
* gets the current HW stats \
|
||||
* state from the device \
|
||||
* queried at the dump time. \
|
||||
*/
|
||||
#define TCA_ACT_HW_STATS_DELAYED \
|
||||
(1 << 1) /* Means that in dump, user gets \
|
||||
* HW stats that might be out of date \
|
||||
* for some time, maybe couple of \
|
||||
* seconds. This is the case when \
|
||||
* driver polls stats updates \
|
||||
* periodically or when it gets async \
|
||||
* stats update from the device. \
|
||||
*/
|
||||
|
||||
#define TCA_ACT_MAX __TCA_ACT_MAX
|
||||
#define TCA_OLD_COMPAT (TCA_ACT_MAX + 1)
|
||||
#define TCA_ACT_MAX_PRIO 32
|
||||
#define TCA_ACT_BIND 1
|
||||
#define TCA_ACT_NOBIND 0
|
||||
#define TCA_ACT_UNBIND 1
|
||||
#define TCA_ACT_NOUNBIND 0
|
||||
#define TCA_ACT_REPLACE 1
|
||||
#define TCA_ACT_NOREPLACE 0
|
||||
|
||||
#define TC_ACT_UNSPEC (-1)
|
||||
#define TC_ACT_OK 0
|
||||
#define TC_ACT_RECLASSIFY 1
|
||||
#define TC_ACT_SHOT 2
|
||||
#define TC_ACT_PIPE 3
|
||||
#define TC_ACT_STOLEN 4
|
||||
#define TC_ACT_QUEUED 5
|
||||
#define TC_ACT_REPEAT 6
|
||||
#define TC_ACT_REDIRECT 7
|
||||
#define TC_ACT_TRAP 8
|
||||
/* For hw path, this means "trap to cpu"
|
||||
* and don't further process the frame
|
||||
* in hardware. For sw path, this is
|
||||
* equivalent of TC_ACT_STOLEN - drop
|
||||
* the skb and act like everything
|
||||
* is alright.
|
||||
*/
|
||||
#define TC_ACT_VALUE_MAX TC_ACT_TRAP
|
||||
|
||||
/* There is a special kind of actions called "extended actions",
|
||||
* which need a value parameter. These have a local opcode located in
|
||||
* the highest nibble, starting from 1. The rest of the bits
|
||||
* are used to carry the value. These two parts together make
|
||||
* a combined opcode.
|
||||
*/
|
||||
#define __TC_ACT_EXT_SHIFT 28
|
||||
#define __TC_ACT_EXT(local) ((local) << __TC_ACT_EXT_SHIFT)
|
||||
#define TC_ACT_EXT_VAL_MASK ((1 << __TC_ACT_EXT_SHIFT) - 1)
|
||||
#define TC_ACT_EXT_OPCODE(combined) ((combined) & (~TC_ACT_EXT_VAL_MASK))
|
||||
#define TC_ACT_EXT_CMP(combined, opcode) (TC_ACT_EXT_OPCODE(combined) == opcode)
|
||||
|
||||
#define TC_ACT_JUMP __TC_ACT_EXT(1)
|
||||
#define TC_ACT_GOTO_CHAIN __TC_ACT_EXT(2)
|
||||
#define TC_ACT_EXT_OPCODE_MAX TC_ACT_GOTO_CHAIN
|
||||
|
||||
/* These macros are put here for binary compatibility with userspace apps that
|
||||
* make use of them. For kernel code and new userspace apps, use the TCA_ID_*
|
||||
* versions.
|
||||
*/
|
||||
#define TCA_ACT_GACT 5
|
||||
#define TCA_ACT_IPT 6
|
||||
#define TCA_ACT_PEDIT 7
|
||||
#define TCA_ACT_MIRRED 8
|
||||
#define TCA_ACT_NAT 9
|
||||
#define TCA_ACT_XT 10
|
||||
#define TCA_ACT_SKBEDIT 11
|
||||
#define TCA_ACT_VLAN 12
|
||||
#define TCA_ACT_BPF 13
|
||||
#define TCA_ACT_CONNMARK 14
|
||||
#define TCA_ACT_SKBMOD 15
|
||||
#define TCA_ACT_CSUM 16
|
||||
#define TCA_ACT_TUNNEL_KEY 17
|
||||
#define TCA_ACT_SIMP 22
|
||||
#define TCA_ACT_IFE 25
|
||||
#define TCA_ACT_SAMPLE 26
|
||||
|
||||
#endif
|
||||
@ -1,196 +0,0 @@
|
||||
#ifndef __SOCKET_DEFS_H__
|
||||
#define __SOCKET_DEFS_H__
|
||||
|
||||
/* Supported address families. */
|
||||
#define AF_UNSPEC 0
|
||||
#define AF_UNIX 1 /* Unix domain sockets */
|
||||
#define AF_LOCAL 1 /* POSIX name for AF_UNIX */
|
||||
#define AF_INET 2 /* Internet IP Protocol */
|
||||
#define AF_AX25 3 /* Amateur Radio AX.25 */
|
||||
#define AF_IPX 4 /* Novell IPX */
|
||||
#define AF_APPLETALK 5 /* AppleTalk DDP */
|
||||
#define AF_NETROM 6 /* Amateur Radio NET/ROM */
|
||||
#define AF_BRIDGE 7 /* Multiprotocol bridge */
|
||||
#define AF_ATMPVC 8 /* ATM PVCs */
|
||||
#define AF_X25 9 /* Reserved for X.25 project */
|
||||
#define AF_INET6 10 /* IP version 6 */
|
||||
#define AF_ROSE 11 /* Amateur Radio X.25 PLP */
|
||||
#define AF_DECnet 12 /* Reserved for DECnet project */
|
||||
#define AF_NETBEUI 13 /* Reserved for 802.2LLC project*/
|
||||
#define AF_SECURITY 14 /* Security callback pseudo AF */
|
||||
#define AF_KEY 15 /* PF_KEY key management API */
|
||||
#define AF_NETLINK 16
|
||||
#define AF_ROUTE AF_NETLINK /* Alias to emulate 4.4BSD */
|
||||
#define AF_PACKET 17 /* Packet family */
|
||||
#define AF_ASH 18 /* Ash */
|
||||
#define AF_ECONET 19 /* Acorn Econet */
|
||||
#define AF_ATMSVC 20 /* ATM SVCs */
|
||||
#define AF_RDS 21 /* RDS sockets */
|
||||
#define AF_SNA 22 /* Linux SNA Project (nutters!) */
|
||||
#define AF_IRDA 23 /* IRDA sockets */
|
||||
#define AF_PPPOX 24 /* PPPoX sockets */
|
||||
#define AF_WANPIPE 25 /* Wanpipe API Sockets */
|
||||
#define AF_LLC 26 /* Linux LLC */
|
||||
#define AF_IB 27 /* Native InfiniBand address */
|
||||
#define AF_MPLS 28 /* MPLS */
|
||||
#define AF_CAN 29 /* Controller Area Network */
|
||||
#define AF_TIPC 30 /* TIPC sockets */
|
||||
#define AF_BLUETOOTH 31 /* Bluetooth sockets */
|
||||
#define AF_IUCV 32 /* IUCV sockets */
|
||||
#define AF_RXRPC 33 /* RxRPC sockets */
|
||||
#define AF_ISDN 34 /* mISDN sockets */
|
||||
#define AF_PHONET 35 /* Phonet sockets */
|
||||
#define AF_IEEE802154 36 /* IEEE802154 sockets */
|
||||
#define AF_CAIF 37 /* CAIF sockets */
|
||||
#define AF_ALG 38 /* Algorithm sockets */
|
||||
#define AF_NFC 39 /* NFC sockets */
|
||||
#define AF_VSOCK 40 /* vSockets */
|
||||
#define AF_KCM 41 /* Kernel Connection Multiplexor*/
|
||||
#define AF_QIPCRTR 42 /* Qualcomm IPC Router */
|
||||
#define AF_SMC 43 /* smc sockets: reserve number for
|
||||
* PF_SMC protocol family that
|
||||
* reuses AF_INET address family
|
||||
*/
|
||||
#define AF_XDP 44 /* XDP sockets */
|
||||
|
||||
#define AF_MAX 45 /* For now.. */
|
||||
|
||||
/* Protocol families, same as address families. */
|
||||
#define PF_UNSPEC AF_UNSPEC
|
||||
#define PF_UNIX AF_UNIX
|
||||
#define PF_LOCAL AF_LOCAL
|
||||
#define PF_INET AF_INET
|
||||
#define PF_AX25 AF_AX25
|
||||
#define PF_IPX AF_IPX
|
||||
#define PF_APPLETALK AF_APPLETALK
|
||||
#define PF_NETROM AF_NETROM
|
||||
#define PF_BRIDGE AF_BRIDGE
|
||||
#define PF_ATMPVC AF_ATMPVC
|
||||
#define PF_X25 AF_X25
|
||||
#define PF_INET6 AF_INET6
|
||||
#define PF_ROSE AF_ROSE
|
||||
#define PF_DECnet AF_DECnet
|
||||
#define PF_NETBEUI AF_NETBEUI
|
||||
#define PF_SECURITY AF_SECURITY
|
||||
#define PF_KEY AF_KEY
|
||||
#define PF_NETLINK AF_NETLINK
|
||||
#define PF_ROUTE AF_ROUTE
|
||||
#define PF_PACKET AF_PACKET
|
||||
#define PF_ASH AF_ASH
|
||||
#define PF_ECONET AF_ECONET
|
||||
#define PF_ATMSVC AF_ATMSVC
|
||||
#define PF_RDS AF_RDS
|
||||
#define PF_SNA AF_SNA
|
||||
#define PF_IRDA AF_IRDA
|
||||
#define PF_PPPOX AF_PPPOX
|
||||
#define PF_WANPIPE AF_WANPIPE
|
||||
#define PF_LLC AF_LLC
|
||||
#define PF_IB AF_IB
|
||||
#define PF_MPLS AF_MPLS
|
||||
#define PF_CAN AF_CAN
|
||||
#define PF_TIPC AF_TIPC
|
||||
#define PF_BLUETOOTH AF_BLUETOOTH
|
||||
#define PF_IUCV AF_IUCV
|
||||
#define PF_RXRPC AF_RXRPC
|
||||
#define PF_ISDN AF_ISDN
|
||||
#define PF_PHONET AF_PHONET
|
||||
#define PF_IEEE802154 AF_IEEE802154
|
||||
#define PF_CAIF AF_CAIF
|
||||
#define PF_ALG AF_ALG
|
||||
#define PF_NFC AF_NFC
|
||||
#define PF_VSOCK AF_VSOCK
|
||||
#define PF_KCM AF_KCM
|
||||
#define PF_QIPCRTR AF_QIPCRTR
|
||||
#define PF_SMC AF_SMC
|
||||
#define PF_XDP AF_XDP
|
||||
#define PF_MAX AF_MAX
|
||||
|
||||
/* Maximum queue length specifiable by listen. */
|
||||
#define SOMAXCONN 4096
|
||||
|
||||
/* Flags we can use with send/ and recv.
|
||||
Added those for 1003.1g not all are supported yet
|
||||
*/
|
||||
|
||||
#define MSG_OOB 1
|
||||
#define MSG_PEEK 2
|
||||
#define MSG_DONTROUTE 4
|
||||
#define MSG_TRYHARD 4 /* Synonym for MSG_DONTROUTE for DECnet */
|
||||
#define MSG_CTRUNC 8
|
||||
#define MSG_PROBE 0x10 /* Do not send. Only probe path f.e. for MTU */
|
||||
#define MSG_TRUNC 0x20
|
||||
#define MSG_DONTWAIT 0x40 /* Nonblocking io */
|
||||
#define MSG_EOR 0x80 /* End of record */
|
||||
#define MSG_WAITALL 0x100 /* Wait for a full request */
|
||||
#define MSG_FIN 0x200
|
||||
#define MSG_SYN 0x400
|
||||
#define MSG_CONFIRM 0x800 /* Confirm path validity */
|
||||
#define MSG_RST 0x1000
|
||||
#define MSG_ERRQUEUE 0x2000 /* Fetch message from error queue */
|
||||
#define MSG_NOSIGNAL 0x4000 /* Do not generate SIGPIPE */
|
||||
#define MSG_MORE 0x8000 /* Sender will send more */
|
||||
#define MSG_WAITFORONE 0x10000 /* recvmmsg(): block until 1+ packets avail */
|
||||
#define MSG_SENDPAGE_NOPOLICY 0x10000 /* sendpage() internal : do no apply policy */
|
||||
#define MSG_SENDPAGE_NOTLAST 0x20000 /* sendpage() internal : not the last page */
|
||||
#define MSG_BATCH 0x40000 /* sendmmsg(): more messages coming */
|
||||
#define MSG_EOF MSG_FIN
|
||||
#define MSG_NO_SHARED_FRAGS 0x80000 /* sendpage() internal : page frags are not shared */
|
||||
#define MSG_SENDPAGE_DECRYPTED 0x100000 /* sendpage() internal : page may carry
|
||||
* plain text and require encryption
|
||||
*/
|
||||
|
||||
#define MSG_ZEROCOPY 0x4000000 /* Use user data in kernel path */
|
||||
#define MSG_FASTOPEN 0x20000000 /* Send data in TCP SYN */
|
||||
#define MSG_CMSG_CLOEXEC 0x40000000 /* Set close_on_exec for file
|
||||
descriptor received through
|
||||
SCM_RIGHTS */
|
||||
#if defined(CONFIG_COMPAT)
|
||||
#define MSG_CMSG_COMPAT 0x80000000 /* This message needs 32 bit fixups */
|
||||
#else
|
||||
#define MSG_CMSG_COMPAT 0 /* We never have 32 bit fixups */
|
||||
#endif
|
||||
|
||||
|
||||
/* Setsockoptions(2) level. Thanks to BSD these must match IPPROTO_xxx */
|
||||
#define SOL_IP 0
|
||||
/* #define SOL_ICMP 1 No-no-no! Due to Linux :-) we cannot use SOL_ICMP=1 */
|
||||
#define SOL_TCP 6
|
||||
#define SOL_UDP 17
|
||||
#define SOL_IPV6 41
|
||||
#define SOL_ICMPV6 58
|
||||
#define SOL_SCTP 132
|
||||
#define SOL_UDPLITE 136 /* UDP-Lite (RFC 3828) */
|
||||
#define SOL_RAW 255
|
||||
#define SOL_IPX 256
|
||||
#define SOL_AX25 257
|
||||
#define SOL_ATALK 258
|
||||
#define SOL_NETROM 259
|
||||
#define SOL_ROSE 260
|
||||
#define SOL_DECNET 261
|
||||
#define SOL_X25 262
|
||||
#define SOL_PACKET 263
|
||||
#define SOL_ATM 264 /* ATM layer (cell level) */
|
||||
#define SOL_AAL 265 /* ATM Adaption Layer (packet level) */
|
||||
#define SOL_IRDA 266
|
||||
#define SOL_NETBEUI 267
|
||||
#define SOL_LLC 268
|
||||
#define SOL_DCCP 269
|
||||
#define SOL_NETLINK 270
|
||||
#define SOL_TIPC 271
|
||||
#define SOL_RXRPC 272
|
||||
#define SOL_PPPOL2TP 273
|
||||
#define SOL_BLUETOOTH 274
|
||||
#define SOL_PNPIPE 275
|
||||
#define SOL_RDS 276
|
||||
#define SOL_IUCV 277
|
||||
#define SOL_CAIF 278
|
||||
#define SOL_ALG 279
|
||||
#define SOL_NFC 280
|
||||
#define SOL_KCM 281
|
||||
#define SOL_TLS 282
|
||||
#define SOL_XDP 283
|
||||
|
||||
/* IPX options */
|
||||
#define IPX_TYPE 1
|
||||
|
||||
#endif
|
||||
@ -6,10 +6,9 @@
|
||||
#include "headers/if_ether_defs.h"
|
||||
#include "headers/pkt_cls_defs.h"
|
||||
#include "headers/socket_defs.h"
|
||||
#include "headers/vmlinux.h" // Use "make ebpf" to generate.
|
||||
#include "headers/vmlinux.h"
|
||||
|
||||
#include <asm-generic/errno-base.h>
|
||||
// #include <linux/bpf.h>
|
||||
|
||||
#include <bpf/bpf_core_read.h>
|
||||
#include <bpf/bpf_endian.h>
|
||||
|
||||
Reference in New Issue
Block a user