mirrors/hello-dns
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
hello-dns/basic.md
Thomas Fossati a8ed23c726 typo (s/one if/one of/)
2019-03-04 09:20:01 +00:00

31 KiB
Raw Permalink Blame History 

            <meta charset="utf-8" emacsmode="-*- markdown -*-">
                        **A warm welcome to DNS**

Note: this page is part of the 'hello-dns' documentation effort.

In this section we will initially ignore optional extensions that were added to DNS later, specifically EDNS and DNSSEC.

This file corresponds roughly to the fundamental parts of RFCs 1034, 1035, 2181, 2308, 3596, 4343, 5452, 6604, 7766 and 8020.

This page, which describes DNS basics, absolutely must be read from beginning to end in order for the rest of the documents (or DNS) to make sense.

DNS Basics

DNS is mostly used to serve IP addresses and mailserver details, but it can contain arbitrary data. DNS is all about names. Every name can have data of several types. The most well known externally useful types are A for IPv4 addresses, AAAA for IPv6 addresses and MX for mailserver details. DNS also has types that have meaning for its own use, like NS, CNAME and SOA.

When we ask a DNS question we call this a query. We call the reply the response. These queries and responses are contained in DNS messages. When UDP is used, the message is also the packet. Note that TCP support is mandatory for DNS in 2018.

A DNS message has:

  • A header
  • A query name and query type
  • An answer section
  • An authority section
  • An additional section

In basic DNS, query messages should have empty answer, authority and additional sections.

The header has the following fields that are useful for queries and responses:

  • ID: a 16 bit identifier used as part of the process of matching queries to responses
  • QR: Set to 0 to identify a message as a query, 1 for a response
  • OPCODE: 0 for a standard query, other opcodes also exist
  • RD: Set to indicate that this question wants recursion

Relevant for responses:

  • AA: This response has Authoritative Answers
  • RA: Recursive service was available
  • TC: Not all the required parts of the response fit in the UDP message
  • RCODE: Result code. 0 is ok, 2 is SERVFAIL, 3 is NXDOMAIN.

DNS queries are mostly sent over UDP, and UDP packets can easily be spoofed. To recognize the authentic response to a query it is important that the ID field is random or at least unpredictable. This is however not enough protection, so the source port of a UDP DNS query must also be unpredictable.

DNS messages can also be sent over TCP/IP. Because TCP is not a datagram oriented protocol, each DNS message in TCP/IP is preceded by a 16 bit network endian length field.

DNS servers must listen on both UDP and TCP, port 53.

The header of a question for the IPv6 address of www.ietf.org looks like this:

  •                                1  1  1  1  1  1

  •  0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | ID = random 16 bits |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • |QR| Opcode |AA|TC|RD|RA| Z | RCODE |
  • |0 | 0 |0 | 0| 0|0 | 0 | 0 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | QDCOUNT = 1 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | ANCOUNT = 0 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | NSCOUNT = 0 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | ARCOUNT = 0 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

Note that we did not spend time on field Z, this is because it is defined to be 0 at all times. This packet does not request recursion. QDCOUNT = 1 means there is 1 question. In theory DNS supported several questions in one message, but this has not been implemented. ANCOUNT, NSCOUNT and ARCOUNT are all zero, indicating there are no answers in this question packet.

Here is the actual question:

  •                                1  1  1  1  1  1  *

  •  0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5  *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 3 | w | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | w | w | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 4 | i | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | e | t | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | f | 3 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | о | r | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | g | 0 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 0 | 28 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 0 | 1 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *

This consists of the 'www.ietf.org' encoded in DNS wire format (for which see below), followed by a 16 bit type field. For AAAA, which denotes the IPv6 address, this is 28. This is then followed by the 'class' of the question. It was originally intended that DNS records would exist in different 'classes', but the semantics of this were not specified completely and it was not really implemented. For now, always set class to 1.

The query name, type and class are also called 'qname', 'qtype' and 'qclass' respectively.

Of specific note is the somewhat unusual way the name 'www.ietf.org' is serialized in DNS. 'www.ietf.org' consists of 3 'labels' of lengths 3, 4 and 3 respectively. In DNS messages, this is encoded as the value 3, then www, then the value 4, then ietf, then 3 followed by org. Then there is a trailing 0 which denotes this is the end.

This format is unusual, but has several highly attractive properties. For example, it is binary safe and it needs no escaping. When writing DNS software, it may be tempting to pass DNS names around as "ASCII". This then leads to escaping and unescaping code in lots of places. It is highly recommended to use the native DNS encoding to store DNS names. This will save a lot of pain when processing DNS names with spaces or dots in them.

Finally, DNS queries are case-insensitive. This however is defined rather mechanically, and limited to ASCII. Operators do not need to know that in some encodings a Ü is equivalent to ü when compared case insensitively. For DNS purposes, the fifth bit (0x20) is ignored when comparing octets within a-z and A-Z.

Note that individual labels of a name may only be 63 octets long.

Next up, a DNS response. Note that this again is a DNS message, and it looks a lot like the original DNS query. Here is the beginning of a response:

  •                                1  1  1  1  1  1           *

  •  0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5           *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | ID = same random 16 bits | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • |QR| Opcode |AA|TC|RD|RA| Z | RCODE | *
  • |1 | 0 | 1| 0| 0| 0| 0 | 0 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | QDCOUNT = 1 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | ANCOUNT = 1 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | NSCOUNT = 0 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | ARCOUNT = 0 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 3 | w | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | w | w | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 4 | i | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | e | t | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | f | 3 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | о | r | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | g | 0 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 0 | 28 (= 0x1c)| *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *
  • | 0 | 1 | *
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+ *

Note that QR is now set to 1 to denote a response. The 'AA' bit was set because this answer came from a server authoritative for this name.

In addition, ANCOUNT is now set to '1', indicating a single answer is to be found in the message, immediately after the original question, which has been repeated from the query message.

To recognize the right response, check that the ID field is the same as in the query, make sure the answer arrives on the right source port and that the query name and type match up with the original query. In addition, make sure not to send out more than one equivalent query when still waiting for the response, as doing so opens a security hole.

After the header and the original question we find the answer:

  •                                1  1  1  1  1  1

  •  0  1  2  3  4  5  6  7  8  9  0  1  2  3  4  5
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 0xc0 | 0x0c |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 00 | 28 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 00 | 01 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | TTL = 3600 |
  • | |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | RDLENGTH = 16 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--|
  • | 24 | 00 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | cb | 00 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 20 | 48 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 00 | 01 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 00 | 00 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 00 | 00 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 68 | 14 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
  • | 00 | 55 |
  • +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+

The first two bytes (0xc0 0x0c) look rather mysterious. When DNS was created, 512 octets was considered the maximum size of a UDP datagram and thus the maximum size of a DNS message transported without using the (then slow) TCP protocol.

In order to squeeze as much information as possible into the 512 bytes, DNS names can (and often MUST) be compressed. The details of this compression are arcane and easy to get wrong, leading to infinite loops or buffer overflows. So tread very carefully. If you remember one thing, make sure that a pointer always has to go to a lower position in the packet. Also beware of signed/unsigned arithmetic.

In this case, the DNS name of the answer is encoded is 0xc0 0x0c. The c0 part has the two most significant bits set, indicating that the following 6+8 bits are a pointer to somewhere earlier in the message. In this case, this points to position 12 (= 0x0c) within the packet, which is immediately after the DNS header. There we find 'www.ietf.org'.

So what this means is that the answer about the DNS name www.ietf.org is also called www.ietf.org.

This is then followed in the packet by '28', which denotes AAAA (IPv6), and the usual 'class' of 1. Then a whole 32 bits are devoted to the Time To Live of this record, followed by a 16 bits length field. Since this is an IPv6 address, the actual answer payload length is 16 bytes (or 128 bits).

This is then followed by the binary representation of the current IPv6 address of www.ietf.org, 2400:cb00:2048:1::6814:55.

If there had been further answers, these would follow this first one, and the ANCOUNT would have been higher than 1. If there had been data in the 'authoritative' and 'additional' sections, that would follow here too, with the corresponding adjustments to 'NSCOUNT' and 'ARCOUNT' fields. More about these sections later.

RRSETs

In the example above, the question for the AAAA record of 'www.ietf.org' had exactly one corresponding resource record. In a human readable 'zone file', this would be stored as:

www.ietf.org	IN	AAAA	3600	2400:cb00:2048:1::6814:55

It is however possible to have multiple AAAA records for the same name. Even if there is only one record, the DNS specifications talk about 'Resource Record Sets', or RRSETs. These operate in unity. So even though the encoding in the DNS packet allows different TTL values within a single RRSET, this should never happen.

Zone files

Zone files are one way of storing DNS data, but these are not integral to the operation of a nameserver. The zone file format is standardized (section 5 of RFC 1035), but it is highly non-trivial to parse. It is entirely possible to write useful nameserver that does not read or write DNS zone files. When embarking on parsing zonefiles, do not do so lightly. As an example, various fields within a single line can appear in many orders. Most fields are optional, and some will then be copied from the previous line. But not all.

Of specific note, many people have attempted to write a grammar (say, in Yacc) for zonefiles and it is almost impossible.

DNS Names

The concept of a DNS name is non-trivial and frequently misunderstood. Despite writing 'www.ietf.org' from left to right, within DNS it is fairer to describe it as 'org' below the root node, with below the 'org' node a node called 'ietf'. Finally to the 'ietf' node is attached a node called 'www'.

Or in graphical form:

  •         +-----+

  •         |     |

  •         +--+--+

  •            |

  •         +--+--+

  •         | ORG |

  •         +--+--+

  •            |

  •         +--+---+

  •         | IETF |

  •         +--+---+

  •            |

  •         +--+--+

  •         | WWW |

  •         +-----+

The 'tree' of nodes as shown above is real and not just another way of visualizing a DNS name. This for example means that if there is a name called 'ns1.ord.ietf.org' and a query comes in for 'ns2.fra.ietf.org', that name exists - even though no records may be assigned to it.

The 'org' zone for example might look like this:

  •                                                                                           *

  •                               .---.                                                       *

  •                    +---------+ org +--------+                                             *

  •                   /           '-+-'          \                                            *

  •                  /              |             \                                           *

  •               .-+-.           .-+-.          .-+-.                                        *

  •              + ietf+         | ietg+        | ... +                                       *

  •               '-+-'           '-+-'          '---'                                        *

  •                / \              |                                                         *

  •               /   \             |                                                         *

  •           .--+.    +---.      .-+-.                                                       *

  •          + ord |  | fra +    | ... +                                                      *

  •           '-+-'    '-+-'      '---'                                                       *

  •             |        |                                                                    *

  •           .-+-.    .-+-.                                                                  *

  •          + ns1 |  | ns2 +                                                                 *

  •           '-+-'    '---'                                                                  *

  •                                                                                           *

NOTE: This means that any implementation that sees DNS as a simple 'key/value' store, where only records that exist can match is headed for trouble down the line. The DNS standard allows implementations to assume that if 'ord.ietf.org' does not exist, neither does ns1. This saves queries but will kill your domain names if you get this wrong.

Zones

As noted, DNS is more complicated than a simple key/value store. This is not only because of the tree style nature of names but also because the same data can live in multiple places, but always lives in a 'zone'.

Various DNS implementations over time have found out that you can mostly ignore the concept of 'zone' for simple nameservers or load balancers, but not implementing zones correctly will eventually trip you up.

To make life confusing, 'www.ietf.org' can be defined in four different places. It could be in the 'root' zone itself, fully written out:

www.ietf.org	IN	AAAA	3600	2400:cb00:2048:1::6814:55

Or it could be in the org zone, where it might look like this:

$origin ORG
www.ietf	IN	AAAA	3600	2400:cb00:2048:1::6814:55

Or, (as is actually the case), this name could live in the 'ietf.org' zone:

$origin ietf.org
www	IN	AAAA	3600	2400:cb00:2048:1::6814:55

And finally, it is even possible that there is a zone called 'www.ietf.org', where the record lives like this:

$origin www.ietf.org
@	IN	AAAA	3600	2400:cb00:2048:1::6814:55

Start of Authority

A zone always starts with a SOA or Start Of Authority record. A SOA record is DNS metadata. It stores various things that may be of interest about a zone, like the email address of the maintainer, the name of the most authoritative server. It also has values that describe how or if a zone needs to be replicated. Finally, the SOA record has a number that influences TTL values for names that do not exist.

There is only one SOA that is guaranteed to exist on the internet and that is the one for the root zone (called '.'). As of 2018, it looks like this:

.   86400   IN   SOA   a.root-servers.net. nstld.verisign-grs.com. 2018032802 1800 900 604800 86400

For details of what all these fields mean, please see the authoritative server document.

The final number however is important here. 86400 denotes that if a response says a name or RRSET does not exist, it will continue to not exist for the next day, and that this knowledge may be cached.

Zone cuts

As noted, 'www.ietf.org' can live in four places. If it lives where it currently does, in the 'ietf.org' zone, it passes through two zone cuts: From . to org, from org to ietf.org.

When an authoritative server receives a query for 'www.ietf.org', it consults which zones it knows about and answers from the most specific zone it has available.

For a root-server, which only knows about the root zone, this means consulting the '.' zone. As noted, 'www.ietf.org' is actually a tree, 'org' -> 'ietf' -> 'www'. And as luck will have it, the first node 'org' is present in the root zone.

Attached to that node is an NS RRSET, which has the names of nameservers that host the ORG zone.

If we ask these servers about 'www.ietf.org', they too find the best zone to answer from, which in this case is 'org'. Within the 'org' zone they then find the 'ietf' node, which again contains an NS RRSET.

When we ask the servers named in that RRSET about 'www.ietf.org', they find a node called 'www' with several RRSETs on it, one of which is for AAAA and contains the IPv6 address we were looking for.

Any authoritative server which does not implement 'zones' in this way will eventually run into trouble. It is not enough to consult a list of known names and answer records attached to those names.

NS Records

These are a mandatory part of a zone, at the 'apex'. The 'apex' is the name of the zone, at which point there is also a SOA record. So a typical zone will start like this:

$ORIGIN ietf.org.
@	IN	SOA	ns1  admin 2018032802 1800 900 604800 86400
	IN	NS	ns1
	IN	NS	ns2

Note how in this zone file example names not ending on a '.' are interpreted as being part of ietf.org. The '@' is a way to specify the name of the apex. Lines two and three omit a name, so they default to '@' too.

This zone lists ns1.ietf.org and ns2.ietf.org as its nameservers. Being part of the zone, this data is authoritative. Any queries sent to this nameserver for the NS RRSET of 'ietf.org' will receive responses with the AA bit set.

Note however that above we learned that the parent zone, 'org' also needs to list the nameservers for example.org, and it does:

$ORIGIN org.
...
ietf	IN	NS	ns1.ietf
ietf	IN	NS	ns2.ietf

If we ask the 'org' nameservers for the NS RRSET of 'ietf.org', we receive a response with AA=0, indicating that the 'org' servers know they aren't 'authoritative' for ietf.org.

Glue records

The astute reader will have spotted a chicken and egg problem here. If ns1.ietf.org is the nameserver for ietf.org... where do we get the IP address of ns1.ietf.org?

To solve this problem, the parent zone can provide a free chicken. In the org zone, we would actually find:

$ORIGIN org.
...
ietf	IN	NS	ns1.ietf
ietf	IN	NS	ns2.ietf
ns1.ietf	IN	A	192.0.2.1
ns2.ietf	IN	A	198.51.100.1

These entries are mirrored in the 'ietf.org' zone hosted on ns1.ietf.org and ns2.ietf.org. And as with the NS records, any queries for ns1.ietf.org sent to the org servers receive AA=0 answers, whereas ns1.ietf.org itself answers with AA=1.

Note that for various reasons the AA=0 answer from the parent zone may be different than the AA=1 answer, and resolvers must be aware of the difference.

Further aspects

The description up to this point is correct, but far from functionally complete even for basic DNS. The following sections describe additional aspects of basic DNS:

CNAME

A CNAME provides the 'Canonical Name' for another DNS name. For example:

www	IN	CNAME	www.ietf.org.cdn.cloudflare.net.

This is frequently used to redirect to a Content Distribution Network. The CNAME is for a name, and not for a type. This means that any query for www.ietf.org is sent to Cloudflare. This simultaneously means that what everyone wants is impossible:

$ORIGIN ietf.org
@	IN	CNAME this.does.not.work.int.

This collides with the SOA and NS records, which are then also redirected and not found. Often, using this 'apex CNAME' may seem to work, but it really doesn't.

In hindsight, the CNAME should have been 'typed' to apply only to specific query types.

When a server encounters a CNAME with the name of a name it was looking for, it will 'follow' the chain to where it points. And please be aware that this can loop.

Wildcards

Wildcards allow for the following:

$ORIGIN ietf.org.
*	IN	A	192.0.2.1
	IN	AAAA	2001:db8:85a3::8a2e:0370:7334
smtp	IN	A	192.0.2.222

A query for the A record of 'smtp.ietf.org' will return 192.0.2.222. A query for 'www.ietf.org' however will return 192.0.2.1.

Interestingly, as another example of how DNS really is a tree, a query for the AAAA record of smtp.ietf.org will return... nothing. This is because the node 'smtp.ietf.org' does exist, and processing ends there. The wildcard match will not proceed to the '*' entry.

Wildcards synthesize new answers. This means that, unless explicitly queried, no '*.ietf.org' record will be served. Instead, a 'www.ietf.org' record is created on the fly.

Truncation

Without implementing the optional EDNS protocol extension, all UDP responses must fit in 512 bytes of payload. If on writing an answer a server finds itself exceeding this limit, it must truncate the packet and set the TC bit to 1.

The originator of the query will then resend the query over TCP.

Sometimes DNS responses contain optional data that could be left out, and this could be done to stay under the 512 byte limit.

It is recommended however to keep it simple and send an empty response packet with TC=1 whenever the byte limit is reached.

Names and nodes that do not exist

DNS queries can fail to match in two ways: the whole node does not exist, or, the requested type is not present at that node.

As an example of the first case, 'doesnotexist.ietf.org' really does not exist, which leads to a response with RCODE NXDOMAIN and no answer records.

As an example of the second case, 'www.ietf.org' does exist, but has no MX record. The RCODE is normal, but there are no answer records.

Empty answers however are hard to cache. To alleviate this situation, in these cases the authoritative server sends a copy of the SOA record in the Authority section of the response. The TTL of that record tells us how long the knowledge of 'no such name' or 'no such data' can be cached.

Query types that are not RRSET types

In addition to the resource record types covered above, like A, AAAA, NS and SOA, two additional types exist that can only be used in queries: ANY, AXFR and IXFR.

An ANY query instructs a nameserver to return all types it immediately has available for a name. This 'immediately' qualification makes ANY queries unsuitable for talking to resolvers - it is not sure the response is in any way complete.

Because of the potential of creating huge answers, the use of ANY is problematic even when talking to authoritative servers, and it may no longer work well in the future.

AXFR and IXFR are requests for (incremental) zone transfers, almost always over TCP. This query asks an authoritative server to list an entire zone. Resolvers do not process AXFR or IXFR queries.

That's it for basic DNS!

This is the core of DNS. There are quite some parts that have not been discussed, but based on the explanations above, it is possible to write a compliant authoritative server.

Further reading

RFC 1034 / 1035

These (1034 & 1035) describe the core of DNS in 1987 language. When reading, disregard mentions of IQUERY and experimental records. They did not survive. Also realize that in this world, authoritative and resolver service were described as a single function. We now know this to be confusing.

RFC 2181: "Clarifications to the DNS Specification"

From 1997, 2181 performs a decade of cleanup work on 1034/1035. It also talks about an early version of DNSSEC (NXT, SIG, KEY records), these sections should not be read as this is unrelated to current DNSSEC (aka DNSSEC-bis).

Of specific note, 5.4.1 describes very exact ordering rules which data a server is supposed to prefer. This list becomes a lot simpler when split up between pure authoritative and pure resolver functions.

RFC 2308: "Negative caching of DNS Queries (NCACHE)

This RFC describes how negative responses are to be cached. The details matter for both authoritative servers and resolvers. Of specific note are the parts that dwell on CNAME chains which lead to a 'no data' or 'NXDOMAIN' situation.

As with 2181, this RFC speaks about an earlier version of DNSSEC, and these parts should be fully ignored.

RFC 3596: "DNS Extensions to Support IP Version 6"

This RFC describes the AAAA record, which is core to DNS as it is required to look up addresses of nameservers.

RFC 4343: "Domain Name System Case Insensitivity Clarification"

4343 clarifies the somewhat odd case insensitivity of DNS but also writes out the escaping rules when using non-ASCII or whitespace in DNS names. As noted before, try not to have to use these rules except when reading DNS data from text files or showing DNS data meant for human consumption. Use native DNS names as much as possible, and create 4343-compliant comparison and equivalence functions.

RFC 5452: "Measures for Making DNS More Resilient against Forged Answers"

This RFC makes source port randomization mandatory for UDP-based DNS messages and also has rules on preventing "birthday attacks".

RFC 6604: "xNAME RCODE Clarification"

6604 further describes the meanings of header bits (AA) and RCODEs when following CNAME chains. Also discusses an earlier version of DNAMEs, these parts are best ignored in lieu of (later) reading the newer DNAME specification.

RFC 7766: DNS Transport over TCP - Implementation Requirements

This RFC updates 1034/1035 to state that TCP is a mandatory part of DNS and a first class citizen. It also updates timeout rules, recommending rather brief timeouts compared to the 'minutes' noted in the original DNS standard.

RFC 8020: NXDOMAIN: There really is nothing underneath

8020 clarifies 1034 and 2308 to state that if 'ord.ietf.org' does not exist, resolvers can safely assume that neither will 'ns1.ord.ietf.org' - without doing any further queries.