Configuration

Open the development shell, which includes all the tools needed:

nix develop

Run the following script to configure the homelab:

make configure

!!! example

<!-- TODO update example input -->

```
Text editor (nvim):
Enter seed repo (github.com/khuedoan/homelab): github.com/example/homelab
Enter your domain (khuedoan.com): example.com
```

It will prompt you to edit the inventory:

IP address: the desired one, not the current one, since your servers have no operating system installed yet
Disk: based on /dev/$DISK, in my case it's sda, but yours can be sdb, nvme0n1...
Network interface: usually it's eth0, mine is eno1
MAC address: the lowercase, colon separated MAC address of the above network interface

!!! example

```yaml title="metal/inventories/prod.yml"
--8<--
metal/inventories/prod.yml
--8<--
```

At the end it will show what has changed. After examining the diff, commit and push the changes.

1.0 KiB Raw Permalink Blame History

Configuration

1.0 KiB

Raw Permalink Blame History